poe injector and splitter Passive POE Cable With PoE Splitter And PoE Injector (POE30M)

 Passive POE Cable, PoE Splitter x1, PoE Injector x1, 30M(pair)

Passive POE Cable with PoE Splitter and PoE Injector (POE30M)

Specifications

Connector Barrel size is 2.1mm (5.5 x 2.1 mm)

Power Pins 4,5 + and 7,8 -

1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet

RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter

to the power socket.

2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.

3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect

the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them.

Input / Output Specifications

DC Input Voltage 48V ± 5 %；

DC Output Voltage 48V ± 5 %

Max Output Current 0.4A Max.；

Over Current Protection None

General Sepcifications:

Operating Temperature 0oC ~ +45oC；

Storage Temperature -30oC ~ +70oC

CASE OF MATERIAL PVC；

Ethernet Date Rate 10/100Mbps

Ethernet Cable TIA/EIA 568 Cat.5；

Humidity Up to 90%

Weight: 70g；

DC Plugs 2.1mmx5.5mmx12mm

Package Include:

PoE Splitter x1；

PoE Injector x1

  http://www.chinaskycctv.com